Easy to use kit requires no soldering! Just add a heatsink/fan to the kit along with a controller or potentiometer + 10V AC Adapter to control the driver (ELN drivers only).
Get the exact same LEDs, driver and lenses as our 12 Ultra Premium Kit except you don't have to solder!
-6 x Solderless Cool White CREE XP-G2 LED
-6 x Solderless Royal Blue CREE XT-E LED
-12 x XP-E/XP-G Lens (Choose from either 40, 60 or 80 degrees with white or black housing)
-1 x LDD-HW driver + 1 x SE-350-48 power supply
-1 x Driver Jumper
-1 x Terminal Plug
-11 x LED to LED wire (choose from 1.5", 3", 4.5", or 6" but unfortunately all lengths must be the same)
-1 x Arctic Alumina Thermal Adhesive or 1 x tube of Thermal Grease
-2 x WAGO 221-412 lever nut (ELN drivers only, LDD drivers won't need these)
-1 x power cord (US + Canada orders only)
Please check out this simple diagram before installation!
Click here for full descriptions of the dimming accessories