Easily stays on CREE XM-L2/XP-L2 Series LEDs via self-adhesive backing.
80 Degree Beam Width
Comes with an adhesive backing so no more gluing required!
High quality optics
White or black housing
Please note due to the shape of the lens using screws with this lens may be difficult. There are two cut-outs on the side of the lens for solder joints though depending on the size of the solder joint the lens may not sit flush with the LED.
This lens does NOT fit the regular LEDs on starboards at this time (soldering keeps the lens from sitting flush) on the pcb. This DOES however fit the solderless LEDs.
If there are solderballs next to the LED chip, these will need to be removed for proper installation.
Bulk Discounts for 80 Degree CREE XM-L2/XP-L2 Lens/Optics
Below are the available bulk discount rates for each individual item when you purchase a certain amount