Loading... Please wait...

Indus 20 by Rapid LED

$299.00

Introducing the Indus series of grow lights from Rapid LED, we've re-designed our fixtures for more distributed light coverage across your grow area.  The Indus uses CREE's new XP-L White LEDs (10W max), the next generation after the XM-L2's.  Choose from cool white (Veg), warm white (Bloom/Flower), or CREE's XP-E Photo Red 660nm LED (please note photo red LEDs are ~3W and not 10W).  Each unit is designed to cover roughly 16" x 24" depending on your hanging height (all of our PAR measurements were done at 18").

In addition, if you're looking for dimming capability simply add a Storm or Bluefish Mini controllers for automated sunrise/sunset control.

Included hardware:

  • 20 CREE XP-L (white) or XP-E (660nm red) LEDs
  • 20 x 60 degree secondary lenses (40 and 80 degree lenses can be substituted upon request)
  • Two LDD-1500L drivers (LDD-1000H will be used on bars with red LEDs)
  • One LDD-H-4 board
  • One SE-350-36 power supply with power cord
  • 20" anodized heatsink with end caps
  • Hanging Kit
  • Splash Guard

Tech specs:

  • Dimensions: 3.5" (wide) x 20" (long) x 3.25" (tall)
  • Total wattage: ~120 for white units, ~70 for red units
  • Input AC: 90-264V (there is a switch on the side of the power supply, please select the approrpriate input voltage before applying power)
  • Weight: 6.75 lbs (light bar only)
  • Maximum PAR: ~950 (at 18" height on Veg units)
  • Dimming signal: 2.6-5.5VDC PWM, otherwise the unit will run at 100% intensity
  • Cool White LED part number: XPLAWT-00-0000-0000V5051
  • Warm White LED part number: XPLAWT-00-0000-000LU60E7
  • Photo Red LED part number: XPEPHR-L1-0000-00801