Kit comes with a pre-drilled heatsink that screws directly into the existing JBJ Nanocube 24g hood!
This retrofit kit will fit seamlessly into your existing Nanocube 24 hood (once gutted), and attaches via 4 screws. Please note you will need a reef controller or potentiometer + 10V AC Adapter to run the dimmable drivers (ELN drivers only).
- 5.9" x 10" Heatsink drilled/tapped for 24 LEDs and 4 installation holes
- 2 Mean Well ELN-60-48P dimmable driver or 2 Mean Well ELN-60-48D dimmable driver or 1 Mean Well LDD-700H + 1 Mean Well LDD-1000H drivers + LDD-H-4S board + SE-350-48 power supply
- 4 WAGO 221-412 lever nuts (plus 12 non-water repellent wire nuts)
- Screws (for the LEDs and to mount the heatsink to the hood)