Loading... Please wait...

Biocube 14 Dimmable Retrofit Kit


Kit comes with a pre-drilled heatsink that screws directly into the existing BC14 hood!

This retrofit kit will fit seamlessly into your existing Biocube 14 hood (once gutted), and attaches via 4 screws.  Please note you will need a reef controller or potentiometer + 10V AC Adapter to run the dimmable driver (ELN drivers only).

  • 4.25" x 9" Heatsink drilled/tapped for 12 LEDs and 4 installation holes
  • 1 zip tie
  • Screws (for the LEDs and to mount the heatsink to the hood

Sorry but this item is currently unavailable.

Please check back at a later stage.