This kit comes with a pre-drilled heatsink that can screw directly into an existing Oceanic BC29 hood!
This retrofit kit will fit seamlessly into your existing Biocube 29 hood (once gutted) and attaches via 4 screws. Please note you will need a reef controller or potentiometers + 10V AC Adapter to run the dimmable drivers (ELN drivers only).
-1 x Nano tank heatsink with included mounting hardware
-12 x Royal Blue CREE XT-E LED
-12 x Cool White CREE XP-G2 LED (for other LED colors/ratios please see options below)
-1 x Mean Well LDD-700H driver + 1 x Mean Well LDD-1000H driver + 1 x LDD-H-4S board + 1 x SE-350-48 power supply
-1 x tube of Thermal Grease
-1 x 12V Adapter
-1 x 92mm Frameless Fan
-4 x WAGO 221-412 lever nut
-2 x power cord (US orders only)
-12 feet of bulk wire
-5 Cord/Zip ties
-Screws (for the LEDs and to mount the heatsink to the hood)