Loading... Please wait...

Solderless CREE XP-E HE Photo Red (660nm) LED

$3.25

*This item has been upgraded to the newest HE Photo Red, top bin -00C01

Please note the maximum current for this LED is only 1000mA, so if mixing with other colors make sure the current does not exceed 1000mA

  • Min. radiant flux 425mW @ 350mA
  • 1000mA max. drive current
  • Minimum PPF - 2.34
  • Forward voltage 2.3V @700mA, 2.5V @1000mA (Note: forward voltage for red LEDs is less than most other colors, so factor this in to your voltage calculations for your string)
  • 650-670nm wavelength
  • 130 degree viewing angle (without a secondary lens), fits our other XP-E lenses
  • CREE part number XPEEPR-L1-0000-00C01

Our solderless LEDs are the same LED chips are our regular LED stock, and you can still use the same lenses! 

  • To be used in conjunction with our LED to LED Wire and Solderless Accessories only
  • You can still use our regular XP-E lenses on these LEDs
  • Comes with a 1.5", 3", 4.5" or 6" LED to LED wire
  • Don't forget to use a Solderless LED Plug to cap the LED string (sold separately)!
  • Please check out this simple diagram before installation!
  • You can still solder this LED if you'd prefer, though we don't recommend using metal screws if soldering

 

Please email us for bulk orders (100+ LEDs) as we will price match and can usually beat other online pricing!

 

Product Videos

Solderless Tutorial (non-dimmable) (04:48)
New tutorial for our new Solderless LEDs. Just meant to give everyone an idea of how easy it is to put everything together, this is not an inclusive instruction manual. Dimmable kits will require additional parts, and if you have any questions please email us at staff@rapidled.com.
  • Solderless Tut...
    New tutorial for our new Solderless LEDs. Just meant to give ...