This simple to use, plug and play two-channel UVA (390-400nm) and Infrared (840-870nm) board is designed to help round out spectrums not normally produced by white LEDs to help trichome production. Dimming of two separate channels requires a controller such as the Bluefish (Mini) or Storm (X), and running without a controller will simply turn on all the lights at 100% intensity
Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink was designed to fit this strip and will slide into the 4' x 4' Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate.
Can be combined with the Emerson Effect Booster Board by using a DC Power Splitter. If using our 30V power supply you can run up to 4 boards (any combination of Emerson + Exotic boards) off a single power supply
If you are using your own power supply you will need to supply between 30-36VDC constant voltage, and a minimum of 30W per board