With LDD drivers and power supply

Solderless 180g Tank DIY Kit


29.00 LBS
Calculated at Checkout

This is our recommended set-up for a standard 180g (72" x 24" x 26") mixed reef tank. For those that don't need dimming, simply select the LDD driver type and you're good to go. For those that would like dimming please select a dimming controller here. Please let us know if you need any help with selecting the proper controller/drivers. 

If you would like a different color set-up feel free to list your color choice under "LED Color Ratio", there is no additional charge to swap/substitute colors. However, the wire lengths provided are per the standard colors and layout provided. The ratio we have listed is roughly 15-16k in color temperature. If you have any special requests (ie. different angled lens, different colored wire) please feel free to list that under the notes section when checking out.

-3 x 6" x 20" Premium Enclosure (with splash guard)
-30 x Solderless Cool White Cree XP-G3 LED
-42 x Solderless Royal Blue Cree XP-G3 LED
-12 x Solderless Violet UV LED
-3 x Solderless Red Cree XP-E LED
-3 x Solderless Green Cree XP-E LED
-9 x Driver Jumper
-9 x Terminal Plug
-9 x 1.5" LED to LED Wire
-21 x 3" LED to LED Wire
-42 x 4.5" LED to LED Wire
-9 x 6" LED to LED Wire
-90 x 60 degree lens (if the lights will be less than 10-12" off the water we would recommend 80 degree lenses instead)
-3 x LDD-700H driver + 6 x LDD-1000H driver + 3 x LDD-H-4S board + 1 x SE-350-48 power supply (if you have any questions on what controllers are compatible with these drivers please email us at staff@rapidled.com or call us at 650 692 9500).  Also, ALWAYS ensure the current output on the drivers is below the maximum threshold for each channel
-1 x Arctic Alumina Thermal Adhesive (for the lenses) and 2 x tube of Thermal Grease (for the LEDs)
-3 x Y-shaped Hanging Kit
-3 x 92mm Frameless Fan
-3 x 12V AC Adapter
-18 x WAGO 221-412 lever nut (if ordering the ELN drivers)
-1 x power cord (US + Canada orders only) (9 power cords if ordering the ELN drivers)
-25 feet of black Bulk Wire
-25 feet of red Bulk Wire
Click here for LED instructions
Click here for our recommended tank layout
Click here for instructions on how to adjust your ELN drivers (SVR2), please ensure you do this before running your LEDs
Please check out this simple diagram before installation!
Click here for full descriptions of the dimming accessories

  • Easy Returns

    If you decide to change your project, don't need an item, or want a different product just contact our customer service team for an easy, hassle-free return within 60 days. Product must be new and unused.

  • Superb Customer Service

    Whether you're asking for product compatibility, have shipping questions, or need something expedited our customer service team is always here to lend a helping hand.

  • Free Shipping Over $229

    If you're in the contiguous US just spend over $229 and we'll ship your goods for free.