The ChilLED Logic Puck was designed specifically as a COB replacement for flowering plants using Samsung LM561C mid-power hyper efficient LEDs. The combination of 3000K + 660nm deep red offers a red shift that is simply not available in OEM chip on board (COB) LEDs. While this board may be used during vegging it was designed with flowering in mind.
Recommended hanging height for the puck is ~18" from the plant canopy.
Designed to fit perfectly on our 140mm pin heatsink without thermal interface material (TIM). If preferred TIM can be used for a nominal performance gain.
Full puck specifications and wiring instructions can be found here
Driver compatibility chart can be found here
For budget limited growers we suggest the following configurations:
2' x 4' space: 3 pucks in series on one HLG-320H-C2100B driver
4' x 4' space: 6 pucks in series on two HLG-320H-C2100B drivers or in parallel on one HLG-600H-48B
5' x 5' space: 9 pucks in series on three HLG-320H-C2100B drivers
For performance/efficiency minded growers we suggest the following configurations:
2' x 4' space: 4 pucks in series on one HLG-480H-C1750B driver
4' x 4' space: 9 pucks in series on three HLG-320H-C2100B drivers or in parallel on one HLG-600H-48B
5' x 5' space: 12 pucks in series on three HLG-480H-C2100B drivers